Best 1/2 Inch Dove Tail Bit 8 Degree

OVERVIEW
Dovetail joints are one of the strongest joiner joints in woodworking. Dovetail joints are great for the construction of boxes, drawers, chests, and fine casework.
Migiwata Dovetail router bits feature a quality piece of carbide that stays sharp and cuts cleanly, even after many uses.
Whiteside offers a 5pc set of quality dovetail bits to fit a wide range of popular dovetailing jigs to meet you diverse joining needs in woodworking.

TECHNICAL DETAILS:
Material: solid hardened steel body and carbide tipped cutters
Color: yellow coating and silver metal
Shank: 1/2”straight shank

WHAT’S INCLUDED:
14° 1/2”* 3/8” dovetail router bit x 1pc
14° 1/2”* 1/2” dovetail router bit x 1pc
14° 1/2”* 5/8” dovetail router bit x 1pc
14° 1/2”* 3/4” dovetail router bit x 1pc
8° 1/2”* 1/4” dovetail router bit x 1pc

SHOP TIPS:
Two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the workpiece. For even easier routing and less stress on your dovetail bit, run the first pass with a straight bit. Use a dovetail on your router table equipped with a fence to achieve difficult chamfer angles.

SAFETY TIPS:
If a dovetail bit jams while working, adjust the position of the bit in the collet and make sure the cutting depth is correct. Do not lift the router out of the template.

Carbide-Tipped Bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits should be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.

Specification:
Material: Carbide
Shank Diameter: 1/4″
Cutting Angle: 10°
Cutting Length: 1/2”
Cutting Depth: 1/2”
Overall Length: 1.95”
Bearing Diameter: 1/2”
Color: Black

Specifications:
Material: Carbide
Shank Diameter: 1/4″
Cutting Length: 9/16”
Cutting Depth: 5/8”
Overall Length: 2-1/2”
Bearing Diameter: 1/2”
Color: Yellow

The package include:
2pc Dovetail Joint Router Bit

This bit is designed for creating drawer box joints and for French dovetailing. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn’t come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1″ overall diameter router bits; Run 20,000 rpm maximum for 1-1/2″ overall diameter router bits; Run 18,000 rpm maximum for 2″ overall diameter; Run 16,000 rpm maximum for 2-1/2″ overall diameter router bits; Run 12,000 rpm maximum for 3″ overall diameter router bits; Run 10,000 rpm maximum for 3-1/2″ overall diameter router bits;

This bit is designed for creating drawer box joints and for French dovetailing. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn’t come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1″ overall diameter router bits; Run 20,000 rpm maximum for 1-1/2″ overall diameter router bits; Run 18,000 rpm maximum for 2″ overall diameter; Run 16,000 rpm maximum for 2-1/2″ overall diameter router bits; Run 12,000 rpm maximum for 3″ overall diameter router bits; Run 10,000 rpm maximum for 3-1/2″ overall diameter router bits;

This bit is designed for creating drawer box joints and for French dovetailing. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn’t come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1″ overall diameter router bits; Run 20,000 rpm maximum for 1-1/2″ overall diameter router bits; Run 18,000 rpm maximum for 2″ overall diameter; Run 16,000 rpm maximum for 2-1/2″ overall diameter router bits; Run 12,000 rpm maximum for 3″ overall diameter router bits; Run 10,000 rpm maximum for 3-1/2″ overall diameter router bits;

Specification:
Type: Dovetail router bit
Material: YG6X primary alloy

Features:
-Made in Solid Carbide.
-High quality and Extra long life.
-Double-edged cutting design, excellent concentricity.
-This section for all kinds of cabinets, door frames, picture frames, ceiling line, the corner line of the various flower line processing, is the necessary tool for decoration, the blade for engraving machine, edge machine and so on.
-Tool can be hardwood, cork, wood and other synthetic wood processing workers smooth surface, but to avoid the processing of copper, iron and other metal materials and sand, stone and other non-wood materials.

Please refer below Size to choose:
No.1
Shank dia: 1/2inch(12.7mm); Blade width: 1/4″(6.35mm); Blade depth: 7mm No.2
Shank dia: 1/2inch(12.7mm); Blade dia: 3/8″(9.52mm); Blade depth: 11mm

No.3
Shank dia: 1/2inch(12.7mm); Blade dia: 1/2″(12.7mm); Blade depth: 12.7mm

No.4
Shank dia: 1/2inch(12.7mm); Blade dia: 5/8″(15.9mm); Blade depth: 15mm

No.5
Shank dia: 1/2inch(12.7mm); Blade dia: 3/4″(19.05mm); Blade depth: 20mm

Note:
-At the trepanning,please wear good protective measures,in case of wood chips splash damage eyes.
-Size for manual measurement, there may be a 0 to 5 mm error, belongs to the normal phenomenon.
-The cutter is sharp enough,please get away from children.
-Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!

Package Included:
1x Router bit

3/8″ x 8 degree, 8mm shank dovetail bit. These bits have 60% more metal than 1/4″ shanks giving you greater stiffness for enhanced usability and increased feed rates in hardwoods. Requires 8mm reducer for 1/2″ collet routers. About Us: Founded in Boston in 1928, Woodcraft’s operations were moved to Parkersburg, West Virginia in 1989. It’s been over 90 years since Woodcraft first began selling high quality woodworking tools and supplies out of a one room shop in Boston’s North End, and Woodcraft is still firmly committed to providing woodworkers with superior products and expert advice. We are America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans

This bit is designed for creating drawer box joints and for French dovetailing. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn’t come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1″ overall diameter router bits; Run 20,000 rpm maximum for 1-1/2″ overall diameter router bits; Run 18,000 rpm maximum for 2″ overall diameter; Run 16,000 rpm maximum for 2-1/2″ overall diameter router bits; Run 12,000 rpm maximum for 3″ overall diameter router bits; Run 10,000 rpm maximum for 3-1/2″ overall diameter router bits;

This bit is designed for creating drawer box joints and for French dovetailing. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn’t come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1″ overall diameter router bits; Run 20,000 rpm maximum for 1-1/2″ overall diameter router bits; Run 18,000 rpm maximum for 2″ overall diameter; Run 16,000 rpm maximum for 2-1/2″ overall diameter router bits; Run 12,000 rpm maximum for 3″ overall diameter router bits; Run 10,000 rpm maximum for 3-1/2″ overall diameter router bits;

The dovetail is probably the most recognizable of all woodworking joints. A dovetail joint is self-aligning and interlocking. There are numerous versions of the dovetail joint, including half blind dovetails, through dovetails, mitered dovetails and sliding dovetails. All of these variations are common in casework and drawer construction. A single dovetail bit can make almost any kind of dovetail, depending on the desired size. You’ll need a jig to make most dovetail joints, as well as a guide bushing for your router. Check the instructions with your dovetail jig to select a bit with the appropriate angle, which will usually be somewhere between 7 and 14 degrees.