Top 9 5 Hp Submerible Pump

Specification: Capacity: 1200 gph @ 1 Ft (4542 lph @ 0.3 m) Shut Off: 26.3 Ft (8 m) Liquid Temperature: 120 F (49 C) Discharge: 1 Inch FNPT (25.4 mm) Impeller: Nylon Electrical: 115 V, 60 Hz Little Giant utility pumps provide efficient, trouble-free service for light commercial or residential applications where water removal or transfer is required. Typical applications for Little Giant 5-MSP Pump include commercial, industrial, and home uses where liquid must be transferred or recirculated. This pump is for submersible use only. It has Removable inlet screen for easy cleaning and removes water down to 1/8″, is 1/6 HP Permanently Lubricated.

Product Description

Specification:

Capacity: 1200 gph @ 1 Ft (4542 lph @ 0.3 m)
Shut Off: 26.3 Ft (8 m)
Liquid Temperature: 120 F (49 C)
Discharge: 1 Inch FNPT (25.4 mm)
Impeller: Nylon
Electrical: 115 V, 60 Hz

Little Giant utility pumps provide efficient, trouble-free service for light commercial or residential applications where water removal or transfer is required. Typical applications for Little Giant 5-MSP Pump include commercial, industrial, and home uses where liquid must be transferred or recirculated. This pump is for submersible use only. It has Removable inlet screen for easy cleaning and removes water down to 1/8″, is 1/6 HP Permanently Lubricated.

From the Manufacturer

Little Giant 1/6 HP Submersible sump/utility pump with cast aluminum housing.

Product Description

5-ASP-LL, 1200 GPH Submersible Utility Pump, 115V, 60 Hz, Typical Applications Include Commercial, Industrial, & Home Uses Where Liquid Must Be Transferred Or Recirculated, 1/6 HP Shaded Pole Motor With Overload Protection, Designed For Continuous Duty, 1″ FNPT Discharge, Piggyback Diaphragm Switch, Pumps Down To 1/8″, 38 mm, In Manual Operation, Garden Hose Adapter, Removable Inlet Screen For Easy Cleaning, Epoxy Coated Cast Aluminum Housing, Viton Shaft Seal, 18′ Cord. The product is manufactured in China. Easy installation and easy handling.

From the Manufacturer

Little Giant 1/6 HP Submersible sump/utility pump with cast aluminum housing.

Product Description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91025, 1/5 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1560 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70’s, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service – Superior Pumps Built to Last!

Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT ‘Manufacturer Refurbished’. We are based in the U.S., customer services, tech support & warranty are handled in the U.S.
FEATURES:
* 4″ deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides heavy duty higher performance and longer life than most other well pumps.
* Solid stainless steel body with heavy duty cast iron discharge
* Industrial grade heavy duty, also good for home usage.
* Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump with 3-Wire (2 wires + ground wire),10′ long electric cord included
* 1.25″ NPT discharge
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire).
* Submersible design eliminates the need for priming and creates quiet operation.
* High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy.
* 150 Max head is for open water tank. The max head will be reduced in pressure tanks. Read the ‘Selection Guide’ for details!
* Installation manual, and tape kit are included.
* Free technical support available during installation.
* Warranty: 12 months limited manufacturer’s warranty

Product Description

FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity

From the Manufacturer

Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 5 Hp Submerible Pump, eg:

• What are Top 10 5 Hp Submerible Pump for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 5 Hp Submerible Pump to buy?
• What are Top Rated 5 Hp Submerible Pump to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 5 Hp Submerible Pump?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 5 Hp Submerible Pump.
• Before deciding to buy any 5 Hp Submerible Pump, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 5 Hp Submerible Pump and What you should consider when buying the 5 Hp Submerible Pump and Where to Buy or Purchase the 5 Hp Submerible Pump. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 5 Hp Submerible Pump of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 5 Hp Submerible Pump.