Best I/O Crest Sata Expantion

PCIe x1 Interface Version 1.0, 4-Port Internal SATA 6Gbps Controller Card, Non-Raid, Marvell 88SE9215 Chipset, with Low Profile Bracket. IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.

The SI-PEX40062 4 port SATA III PCI-E 2.0 X2 controller card marvel 88SE9235 chipset adds four SATA III ports to a computer through a PCI-E 2.0 X2 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gaps, the controller card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for SATA 600 MB/s storage needs.

An innovation in design and concept, user configurable SATA connectors. 2 SATA channels can be set as internal, external or combination with few jumpers. ASM106x chipset support Windows server 2012.

The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer with SATA ports. Once installed¸ this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device. The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer system.

The SI-PEX40064 2 port SATA III 2 port east PCI-E 2.0 X1 controller card marvel 88SE9235 chipset adds two SATA III and two east III ports to a computer through a PCI-E 2.0 X1 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gbps, the controller card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for SATA 600 MB/s storage needs.

Features :

Industry Specifications Compliance:
PCI Express Base Specification Rev. 2.0
PCI Express Card Electromechanical Rev. 2.0
Serial ATA AHCI Spec. Rev.1.3
Serial ATA Revision 3.2
Serial ATA Features
Supports 2 ports Serial ATA PHY
1.5Gbps, 3.0Gbps and 6.0Gbps speed negotiation
SATA PHY 1i/1m/2i/2m/3i
Supports AHCI and IDE programming interface
Supports Native Command Queue (NCQ)
Supports Port Multiplier command based switching
Embedded hardware RAID engine
Supports RAID0, RAID1, SPAN
RAID mode changeable, controlled via the setting by two GPIOs or GUI utility
RAID0 high performance for the data transmission
Supports S.M.A.R.T feature
Supports automatic rebuild
Supports high performance off-line rebuild
Supports background rebuild

System Requirements:
PCI Express-enabled system with one available PCI Express slot
Windows8/ 7 (32/64 bit)/Vista (32/64 bit)/XP/Server 2003/2008

Package Contents:
1 x PCIe SATA III 6Gb/s Controller RAID Card
1x Small baffle bracket

Syba’ s 2 port SATA 6GB/s PCI-E X1 is a High performance SATA host adapter designed to add two internal serial ATA 6GB/s channels to your PCIe-equipped computer for additional hard disk drive connections. It supports SATA hard disk drives up to 4TB, ATA/ATAPI-7 specification as well as port multiplier. Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, span) support. Includes both a full and low profile/half-height bracket for installation into any size of desktop computer.

The I/O CREST SI-PEX40129 is a great accelerated secondary storage solution for any workstation with true PCIe 3.0 x8 bandwidth (x16 Interface). It has two M.2 NVMe ports to accept two NVMe M.2 SSDs, so each NVMe M.2 SSD has dedicated PCIe 3.0 x4 bus bandwidth. It delivers transfer speeds 20 times faster than SATA SSDs. By by-passing the traditional PCIe 3.0 x4 NVMe solutions, using the SI-PEX40129 will allow user add 2 M.2 NVMe into any non-Bifurcation PCIe x16 slot to achieve their full potential with a bandwidth of up to 6,500 MB/s. Unlike onboard DMI 3.0 based NVMe solutions or Single NVMe PCI-e x4, which are forced to share a single PCIe 3.0 x4 lane with the motherboard’s data ports, the SI-PEX40129 combines 2- M.2 drives to be able to run on PCIe 3.0 x16 lane. This unique architecture allows the drive to interface directly with the platform’s CPU, which provides PCIe x4 bandwidth for each NVMe SSD!

The SI-PEX40137 8-Port PCI Express 2.0 SATA Controller Card adds 8 AHCI SATA III ports to a computer through a PCIe x4 or larger slot, delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs).

The SI-PEX40137 uses two Marvell 9215 that can be used for embedded platform applications such as home NAS/media servers, DVR/NVR and set-top boxes, or vendors can develop their own software RAID boxes with FreeNAS.

This PCIe SATA 6gbps card is backed by a 3-year sybausa.com warranty and free lifetime technical support.

The PCI-e Controller Card gives you an easy way to add additional 4 internal SATA III ports to your computer by a single PCI Express slot. The SATA III ports offer a blazing-fast speed of 6Gbps, while remaining backwards compatible with the SATA I and SATA II specifications. Also, it supports Port Multiplier FIS Based or Command Based switching, ensuring maximum performance. Chipset: Marvell 88SE9215 Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIe 1.x Compliant with Serial ATA Specification 3.0 Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Hot Plug and Hot Swap Supports Native Command Queue (NCQ) Supports Port Multiplier FIS Based Switching or Command Based Switching Compatible with SATA 6G, 3G and 1.5G Hard Drives SATA ports are bootable For port multiplier function, please follow Windows 8 instructions in Download’s tab. Not a Hardware RAID controller. Supports 3TB and 4TB hard drives.

Color:4-Port SATA 3.0  Card

PCIe X1 to 4 SATA 3.0 ports controller card offers a simple connection between a host computer and SATA 3.0 devices(SATA hard drive or SATA device), which allows 4 SATA devices at the speed up to 6Gb/s.                                                                                            

✿ Features

 ➤Chipset: Marvell 88SE9215

➤ Support 4 SATA 3.0 6Gbps devices

➤Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIex1

➤Compliant with Serial ATA Specification 3.0

➤Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps

➤ Plug and play, supports Hot Plug and Hot Swap

✿ System Requirements

➤ Applicable Slots: PCI-Express X1, can be used on PCIe X4 X8 X16 slots

➤ System: Support for Windows XP / 7 / 8 / 10(32/64 bit) /VISTA / MAC / NAS / Linux

✿ Package Contents

– 1 x PCIe X1 to 4 SATA 3.0 controller card

– 4 x SATA Cable（40cm/15.6in）

– 1 x Low-profile bracket 

– 1 x Screwdriver

– 1 x Screw kit

– 1 x Anti-static bag

✿We have professional R&D team, will continue to launch new products to meet customer needs and thank you for your supporting!